Browser 106

max 1GB

Inspector media/spectrum-analyzer

Spectrum Analyser

Overview

A real-time frequency display fed either from your microphone or from a file you drop in. The bars sit on a log frequency axis so the low end gets the room it needs, and a peak hold decays slowly over the top — without it, a 60 fps display is unreadable on anything transient, because the bars are gone before your eye reaches them. The microphone is opened only when you ask for it, never on load, and audio is never routed back to your speakers, so there is no feedback loop. Nothing is recorded and nothing is uploaded; the analysis happens frame by frame and is discarded.

Check a roomSee which frequencies a space emphasises by playing pink noise and watching the curve.
Set up a PAWatch the balance while you ring out a system.
Look at an instrumentSee where a voice or an instrument actually sits.

Set

Media 16

Neighbours

01 Audio Converter 02 BPM Detector 03 Video comprimeren 04 Audio uit video halen 05 Audio HLS Stream Generator 06 HLS Stream Generator

Specification

Command: media.spectrum_analyzer
Set: Media
Input: MIXED
Output: —
Max. bestand: 1GB
Batch: single file

MPEG WAV FLAC MP4 OGG OPUS AAC WEBM

Runtime

Engine: ffmpeg-wasm 0.12
Threads: — workers
Isolated: —
WebGPU: —
Memory: —

Transport 0 B

The file is opened, worked on and written back inside this tab. No upload step exists in this tool — there is nowhere for the bytes to go.

Keys

Zoeken: ⌘K
Panels: ⌘1 · ⌘2
Full width: F
All keys: ⌘/

How it works

Choose a source

Tap Use microphone, or drop an audio file. Permission is only ever requested when you ask.

Watch the balance

Bars show the current spectrum; the thin line above each is the peak hold.

Read the axis

Frequency runs logarithmically from 20 Hz to 20 kHz.

Frequently asked

Does this record anything?

No. Each frame is analysed and thrown away. Nothing is stored, and nothing is sent anywhere.

Why does it ask for microphone permission?

Only when you press the button — never on load. If you decline, the tool still works: drop a file instead and it runs through exactly the same display.

Are the levels calibrated?

No, and no browser tool can be: the reading depends on your microphone and its gain. This measures balance between frequencies, not absolute sound pressure. For SPL you need a calibrated meter.

Why is echo cancellation turned off?

Because it is a processor, and a spectrum read through it is a picture of the processor. Noise suppression and automatic gain are disabled for the same reason.

Keys

Zoeken: ⌘K
Panels: ⌘1 · ⌘2
Full width: F
All keys: ⌘/

Gerelateerd · Media